720-275-1143
720-220-2576

turbospeedautosale@gmail.com

2860 S Elati St. Englewood, CO 80110

TurboSpeed Auto Sales

Book an Appointment

Timing Belts & Chains Replacement – Genesis – Englewood, Colorado

From the agile G70 to the flagship G90 and SUV icons GV70 and GV80, precise engine timing is essential for quiet starts, smooth power, and long-term reliability. At TurboSpeed Auto Sales LLC in Englewood, Colorado, we perform OEM-spec timing chain and legacy timing belt services using factory procedures, correct sealants, and torque-to-angle specs.

We service Smartstream, Theta II/III, and Lambda/Tau-based powertrains used across Genesis sedans and SUVs—setting cam/crank timing perfectly the first time.

Genesis Timing Belts Chains Replacement Englewood Colorado

Why Timing Service Matters

  • Prevents valve-to-piston contact on interference designs.
  • Restores accurate cam/crank synchronization for peak performance and MPG.
  • Eliminates cold-start rattle, chain slap, or phaser noise that trigger MIL/VVT codes.
  • Extends engine life with OEM components, correct sealants, and fluids.

Genesis Models We Service

  • Sedans: G70, G80, G90
  • SUVs: GV70, GV80
  • Trims/Powertrains: 2.0T / 2.5T, 3.3T, 3.5T, 3.8 V6, 5.0 V8 (legacy)

Note: Modern Genesis engines are predominantly timing chain designs. A few legacy/related Hyundai platforms used belts. We verify by VIN for exact parts and labor.

Engines We Service for Timing

  • 2.0T / 2.5T (G70/G80/GV70): chain sets, guides, tensioners, CVVD/VVT phasers, front cover reseal.
  • 3.3T Lambda II (G70/G80/G90): primary/secondary chains, phasers, oil control valves, crank/cam seals.
  • 3.5T (GV70/GV80/G80): twin-turbo chain system, phasers, HPFP drive inspection, correlation checks.
  • 3.8 V6 (legacy G80/G90): chain service, tensioners/guides, front cover reseal.
  • 5.0 Tau V8 (legacy G90): chain sets, phasers, front main & cam seal service.

Signs You Need Timing Service

  • Rattle/tick on cold start; chain slap or phaser knock.
  • Cam/crank correlation or VVT performance codes (P0011, P0014, P0016–P0019).
  • Rough idle, hesitation, misfires, or reduced power.
  • Oil seep at timing cover, front crank, or cam seals.
  • High mileage or unknown service history (for any belt-driven legacy application).

What’s Included in Our Timing Service

  • Primary components: belt/chain, tensioners, guides/rails, idlers, and VVT/CVVD phasers (as required).
  • Seals & reseal: front crank & cam seals; timing cover reseal with Genesis/Hyundai-approved RTV.
  • Water pump: replaced on belt-driven setups or if wear/leaks are present.
  • Hardware & fluids: new one-time-use bolts; fresh coolant/oil with correct bleed procedures.
  • Calibration: relearns/adaptives, idle trims, and an enhanced post-repair scan report.

Our Genesis Timing Service Process

  • 1) VIN verification: confirm belt vs chain, kit contents, and special tools.
  • 2) Baseline diagnostics: live-data correlation, oil pressure, and noise evaluation.
  • 3) Precision disassembly: inspect guides, phasers, pump, seals, and cover surfaces.
  • 4) Installation: set timing per factory SI using locking fixtures and torque/angle specs.
  • 5) Fluids & relearns: refill/bleed, clear codes, perform relearns and road test.
  • 6) Delivery: digital photo report with next-interval recommendations.

FAQs

Do you use OEM parts?

Yes—Genesis/Hyundai OEM or premium OE-equivalent kits (Aisin/INA/Gates) with factory procedures and torque specs.

Replace the water pump on timing service?

If timing-driven or showing wear/leaks, replacing it prevents duplicate labor later.

Brief start-up rattle—chain, tensioner, or VVT?

We confirm with oil pressure checks, correlation data, and mechanical inspection to pinpoint the cause.

Book Your Genesis Timing Service in Englewood, Colorado

Call (720) 275-1143 or
(720) 220-2576

Schedule Appointment