720-275-1143
720-220-2576

turbospeedautosale@gmail.com

2860 S Elati St. Englewood, CO 80110

TurboSpeed Auto Sales

Book an Appointment

Timing Belts & Chains Replacement – Chevrolet / GMC – Englewood, Colorado

Protect your GM engine with precision timing service. We handle both timing belts and timing chains using OE procedures, special tools, and torque specs. At TurboSpeed Auto Sales LLC in Englewood, Colorado, our ASE-certified technicians perform accurate cam and crank timing, ensuring lasting reliability for your Chevrolet or GMC vehicle.

Serving Silverado / Sierra, Tahoe / Suburban / Yukon, Malibu, and Camaro — covering LS/LT V8, Ecotec turbo, 2.7L L3B, 3.0L turbo, and Duramax diesel platforms.

Chevrolet GMC Timing Chain and Belt Service Englewood Colorado

Why Timing Service Matters

  • Prevents valve-to-piston contact on interference engines.
  • Restores cam/crank synchronization for smooth power and fuel efficiency.
  • Eliminates start-up rattle, chain slap, and belt slip that cause check-engine lights.
  • Protects your investment with factory-spec components, sealants, and fluids.

Chevrolet / GMC Models Covered

  • Trucks: Silverado 1500/2500/3500 • Sierra 1500/2500/3500
  • Full-Size SUVs: Tahoe, Suburban • Yukon / Yukon XL
  • Cars & Performance: Malibu, Camaro (LS/LT V8 & 2.0T)
  • Crossovers: Equinox, Traverse, Blazer, Trailblazer

Note: Most late-model GM engines use timing chains; some older or auxiliary systems still use belts. We verify by VIN for accurate quoting.

Engines We Service for Timing

  • LS / LT V8 (5.3 / 6.2): AFM/DOD lifter-related wear, chains, guides, tensioners, phasers.
  • Ecotec Turbo (1.5T / 2.0T): chains, HPFP drive, VVT phasers, timing cover reseal.
  • 2.7L L3B / 3.0L Turbo: chain sets, phasers, oil system inspection, charge-air review.
  • V6/V8 Vortec: timing sets, seals, coolant/oil leak repair.
  • Duramax (2.8/3.0/6.6): drive components inspection and service (engine-specific).

Signs You Need Timing Service

  • Cold-start rattle, ticking, or phaser knock.
  • Cam/crank correlation and VVT performance codes (P00xx, P001x, P0017, etc.).
  • Misfires, rough idle, hesitation, or reduced power.
  • Oil leaks from timing cover or front crank seal.
  • High-mileage belt with visible cracks, glazing, or oil contamination.

What’s Included in a Complete Timing Job

  • Primary Components: belt/chain, guides, tensioners, idlers, and phasers (if equipped).
  • Seals & Gaskets: new front crank & cam seals, timing cover reseal with OE-approved sealant.
  • Cooling / Water Pump: replacement if timing-driven or showing leaks or play.
  • Hardware & Fluids: new one-time-use bolts, fresh coolant and oil refill.
  • Calibration: post-service relearns, idle trims, and enhanced scan confirmation.

Our Timing Service Process in Englewood, Colorado

  • 1) Verification: confirm belt or chain type by VIN and engine code.
  • 2) Diagnostics: live data correlation, oil pressure, and mechanical noise checks.
  • 3) Disassembly: inspect all guides, phasers, and seals before replacement.
  • 4) Installation: perform timing alignment using GM special tools and torque specs.
  • 5) Fluids & Relearns: refill, bleed, and road-test the vehicle to validate repair.
  • 6) Report: provide digital inspection results and maintenance recommendations.

FAQs

Do you use OEM timing components?

Yes, we use OEM or premium OE-equivalent kits and always follow GM service procedures.

Should I replace the water pump?

If it’s timing-driven or shows wear, we recommend replacing it during timing service to avoid future labor costs.

Do you service Duramax timing systems?

Yes, we handle chain-driven and gear-driven Duramax configurations using GM SI data and diesel-specific tools.

Book Your Chevrolet / GMC Timing Service in Englewood, Colorado

Call (720) 275-1143 or
(720) 220-2576

Schedule Appointment